Rinnai Infinity EF24 External
A new generation of continuous flow water heater
Temperature controlled continuous flow gas hot water system for external applications. Factory preset to 55 °C.
• High efficiency (95%)
• Lower gas emissions (due to a secondary heat exchanger)
• Subsequent savings (water is preheated so doesn't use as much energy)
RRP $2,275
Extended warranty if installed with controllers.
Suitable for
• Commercial and domestic external applications
• Mains and low pressure systems
• Solar installations as a gas boost
Hard or acidic water will need to be treated in order to use this product.
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
Clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.
| Colour: | White |
| Input: | 162 MJ/h or 45 kW |
| Output: | 43 kW |
| Efficiency: | 95% |
| Energy Star Rating: | 6.8 stars |
| REU Number: | REU-K2430WG |
| Capacity | Hot water capacity: 2.3 to 30 litres per minute Nominal water capacity: 24 litres per minute at a 25 °C rise (1440 L/h) |
| Connections | Hot water oulet: R¾ (20 mm) Cold water inlet: R¾ (20 mm) Gas supply: R¾ (20 mm) Condensate: R½ (15 mm) |
| Exhaust System | Forced flue |
| Ignition System | Direct electronic ignition |
| Injector Size | NG: 0.90, 1.50, LPG: 0.75, 1.15 |
| Line Pressure (min.) | NG: 1.13 kPa, LPG: 2.75 kPa |
| Line Pressure (max.) |
3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa). In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down. |
| Power Consumption | Normal: 50 W, Standby: < 3 W (with one remote), Automatic Frost Protection: 118 W |
| Noise Level | 49 dB(A) |
| NOx af | < 60 ppm |
| Safety Devices | Flame failure, boil-dry protection, overheat protection (OHS), fusible link, pressure relief valve, combustion fan rpm check |
| Water Supply | Nominal operating pressure: 240-1000 kPa Minimum water flow: 2.4 litres per minute |
| Weight | 27 kg |
| Market Release | • first released 2008 • relaunched 2011 |
| Compliance | ESS: Supplier Declaration of Compliance • Declaration Number: Rin7956 • Certificate Number: 7083 |
| A | Height | 350 |
| B | Depth | 277 |
| C | Height of unit | 600 |
| D | Height including brackets | 644 |
| E | Hot water outlet from wall | 164.5 |
| F | Hot water outlet from centre | 100 |
| G | Cold water inlet from wall | 83 |
| H | Cold water inlet from centre (measurement is to left of centre line) |
53* |
| I | Gas connection from wall | 70.5 |
| J | Gas connection from centre | 25 |
| K | Condensate outlet from wall | 33 |
| L | Condensate outlet from centre | 132 |
| M | Gas: Length of gas connection (from base) Cold: Length of cold water inlet (from base) Hot: Length of hot water outlet (from base) Condensate connection length (from base) |
51 62 41 24 |
