Rinnai Infinity XR26 External
Temperature controlled continuous flow gas hot water system for external domestic applications. Factory preset to 55 °C.
Hot water capacity
2.4 to 30 litres per minute.
Continuous flow hot water
This type of hot water system produces endless hot water. Continuous flow is an energy efficient water heating system—it's only on when you need hot water.
• External domestic installations
• High simultaneous hot water demand applications (homes with 1-2 bathrooms)
• Mains and low pressure systems
Hard or acidic water will need to be treated in order to use this product.
Available for Natural Gas or LPG. Specify gas type at time of purchase.
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.
ESS: Supplier Declaration of Compliance
Declaration Number: 971120094
Certificate Number: 6930
|Input:||199 MJ/h or 55 kW|
|Energy Star Rating||5.5 stars|
|Capacity||Hot water capacity: 2.4 to 30 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
|Connections||Hot water oulet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
|Exhaust System||Forced flue|
|Ignition System||Direct electronic ignition|
|Injector Size||NG: 1.00, 1.55, LPG: 0.70, 1.05|
|Line Pressure (min.)||NG: 1.13 kPa, LPG: 2.75 kPa|
|Line Pressure (max.)||
3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).
In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.
|Power Consumption||Normal: 52 W (NG) and 57 W (LPG), Standby: 2 W, Automatic Frost Protection: 74 W|
|Pressure Relief||Valve opens at 2060 kPa, valve closes at 1470 kPa|
|Noise Level||49 dB(A)|
|NOx af||52 ppm|
|Safety Devices||Flame failure, boil-dry protection, overheat protection (OHS), fusible link, pressure relief valve, combustion fan rpm check|
|Water Supply||Nominal operating pressure: 130-1000 kPa
Minimum water flow: 2.4 litres per minute
|All dimensions are in mm|
|C||Height of unit||530|
|D||Height including brackets||571|
||Hot water outlet from wall||87|
|F||Hot water outlet from centre||105|
|G||Cold water inlet from wall||68|
|H||Cold water inlet from centre||10|
|I||Gas connection from wall||77|
|J||Gas connection from centre||83|
|K||Condensate outlet from wall||•|
|L||Condensate outlet from centre||•|
|M||Gas: Length of gas connection (from base)
Cold: Length of cold water inlet (from base)
Hot: Length of hot water outlet (from base)