Rinnai Portable Convector Blaze 5.9 kW
DISCONTINUED SEPTEMBER 2012
Portable, powerful and energy efficient
- Energy-efficiency: Outputting 90% of energy used
- Outstandingly effective: Using a new, very powerful, low-emission ceramic burner
- Portable and powerful: These heaters reach the set temperature of the room up to 41% quicker than reverse cycle air conditioning units*
For the convenience of operating the heater between standby or on, as well as adjusting the temperature up or down.
This function will automatically operate the appliance before the programmed start time so the room will be preheated to the set temperature when the timer comes on.
Allows you to program the appliance to come on for two separate periods each day, one period in the morning and one period in the evening.
No exposed flame, cool to touch cabinet**, and child lock as standard.
* Reference Vipac Report 870127_TST_003526
** Louvre component of the heater will still be hot
Please note: Room sizing is important. This heater modulates to a low setting, and does not turn off. It is important that the room is of sufficient size that it will not overheat when the heater is on low—please refer to the ‘SUITABLE FOR’ tab for more information.
Domestic heating appliance, suitable for medium to large sized areas. Can heat up to 79 m² (depending on where you live).
This heater must not be installed in a room smaller than 52.5 m³ .
This is an unflued appliance and is not suitable for; bedrooms, bathrooms, oilets, saunas, or spa rooms.
Available for Natural Gas or LPG. Specify gas type at time of purchase.
Appliance cannot be converted.
|Energy Star Rating:||5.8 stars|
|Burner||Ceramic surface combustion burner|
|Data Plate||Lower right hand panel|
|Fan Type||Multi speed fan|
|Gas Control||Electronic control|
|Gas Connection||Flexible gas hose with bayonet connection|
|Ignition System||Continuous spark electronic ignition|
|Noise Level||41 dB(A)|
|Power Consumption||16.5-25 W, standby < 0.8 W
Power cord located lower right hand side of rear panel
|Safety Devices||Overheat switch, electric fuse, flame failure sensor, oxygen depletion sensor, tilt switch, and power failure|